Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Supplied By
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Segments
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Recommended Applications
Surfaces to be bonded should be clean and dry. Dispense a drop or drops to one surface only. Apply only enough to leave a thin film layer after compression. Press parts together and hold firmly for a few seconds. Good contact is essential. An adequate bond develops in less that one minute and maximum strength is attained in 24 hours. Wipe off excess adhesive from the top of the container and recap. Apollo products if left uncapped may deteriorate by contamination from moisture in the air. Because Apollo products cure by polymerization, whitening may appear on the surface of the container or the bonded materials. This will not affect adhesive performance.
Properties
- Color
- Note
*Rubber figures given are typical. Your results may vary by specific rubber type.
**Tested to ASTM 4501.
***n/r = not recommended.
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Regional Availability
Storage & Handling
- Shelf Life
- 9 months
- Storage Information
Products should be stored unopened in a cool, dry place out of direct sunlight. Products should be kept at room temperature away from direct light. Protect from extreme heat or cold, do not refrigerate.