Enhanced TDS
Identification & Functionality
- Chemical Name
- Supplied By
- Industrial Additives Functions
- CAS No.
- 105-59-9
- EC No.
- 203-312-7
- Technologies
- Product Families
Features & Benefits
- Industrial Additives Features
- Product Highlights
JEFFTREAT® MP offers the following advantages over conventional solvents:
- Lower Operating Costs.
- Increased Processing Capacity.
- Using Existing Treating Equipment.
- Reduced Capital Cost for New Installations.
- Improved Product Stability.
- Lower Solvent Losses.
- Reduced Corrosion.
Applications & Uses
- Markets
- Applications
- Segments
- Applications
- Applicable Processes
- Product Applications
JEFFTREAT® MP solvent is formulated to provide deep removal of CO₂ from gas processing applications, such as LNG pre-treatment plants, hydrogen production, ammonia manufacture and cryogenic gas processing.
- Recommended Applications
JEFFTREAT MP bulk CO₂ solvent can be used for gas and liquid treating applications. It should be considered as an alternative for applications which currently use first generation primary or secondary alkanolamines such as MEA and DEA to remove CO₂.
JEFFTREAT MP solvent should also be considered for applications which currently use MDEA or formulated MDEA solvents, but require deeper CO₂ removal such as:
- Hydrogen Production Facilities.
- Ammonia Plants.
- Natural Gas Upgrading.
- LNG Production.
JEFFTREAT MP bulk CO₂ solvent should be considered mainly for applications in which H₂S is not present or applications in which the mole ratio of CO₂ to H₂S in the untreated gas is very high. Huntsman recommends that JEFFTREAT MP solvent be used in concentrations of 40 to 50 wt.% for optimum process efficiency.
Properties
- Physical Form
Regulatory & Compliance
- Chemical Inventories
Packaging & Availability
Storage & Handling
- Handling and Storage Information
- The handling and storage of JEFFTREAT MP presents no unusual problems.
- The solvent properties and alkaline nature of JEFFTREAT MP should be considered when choosing materials of construction.
- JEFFTREAT MP should not be stored in tanks made from zinc, galvanized steel, or copper and its alloys since the solvent will react with copper to form complex salts.
- Also avoid the use of elastomers such as Buna N, Viton, Neoprene and nitrile as these materials tend to swell when exposed to the amine.
- Kalrez 1050 LF performs satisfactorily in amine service as well as materials made from polypropylene and Teflon®.
- A carbon steel storage tank, constructed according to a recognized code, is generally satisfactory.
- Carbon steel transfer lines, joined by welds or flanges, are suitable.
- Screw joints are subject to failure unless back-welded.
- Flexitallic® gaskets work well for flanged connections.
- For pumps, a Durametallic Type RO-TT mechanical seal, or equivalent is suitable.