Enhanced TDS
Identification & Functionality
- Chemical Family
- Supplied By
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- Industrial Additives Features
Applications & Uses
- Markets
- Applications
- Segments
- Applications
- Applicable Processes
- Compatible Substrates & Surfaces
- Application and Usage Information
- Predominantly used for effective solid-liquid separation in which Magnafloc 1607 is applied separately to, or in combination with, an anionic flocculant.
- Magnafloc 1607 is an effective clarification aid for gravity separation and filtration processes on various mineral and/or organic substrates.
- The correct dosage of Magnafloc1607 depends on the conditions involved in the particular process.
- Typically this is in the range of 1 – 10 ppm but it will normally be determined by test work on the substrate.
- On a plant scale, a stock solution concentration of 0.1 to 1.0 % as supplied is recommended for addition to the system.
- This is readily obtained by either batch mixing with water in a stirred tank, or alternatively by metering the concentrated product directly to the system and diluting inline.
- In the latter case, a metering pump of the positive displacement type with adequate corrosion-resistant characteristics is recommended.
- For optimum results, Magnafloc 1607 should be added to the system at a point of sufficient turbulence to ensure good initial dispersion and adequate mixing.
- This point will be prior to the clarifiers or filters and, ideally, the turbulent flow zone at the addition point should be followed by a quiescent zone with gentle flow conditions to allow coagulation to occur.
- In situations where an adequate addition point does not exist, turbulence may be induced by introducing an in-line mixer or a baffled zone etc.
Properties
- Physical Form
- Appearance
- Clear, pale yellow liquid
- Miscible in
- Water
Regulatory & Compliance
- Chemical Inventories
Safety & Health
- Health and Safety Precautions
Magnafloc 1687 exhibits a very low order of oral toxicity and does not pre- sent any abnormal problems in its handling or general use. It is nevertheless recommended that inhalation, ingestion, skin contact and eye contact be avoided. As with all cationic polyelectrolyte polymers this product exhibits toxicity towards fish. It is important that precautions are taken where the product may come into direct contact with fresh water courses, streams and rivers.
Packaging & Availability
- Packaging Type
- Regional Availability
Storage & Handling
- Handling and Storage Information
Storage & Shelf Life:
- Product as supplied. Under normal storage conditions, Magnafloc 1687 is stable for up to 12 months in its original packaging.
- Preferably the product should be stored at temperatures in the range of 5 – 25 °C.
- The recommended storage periods for dilute solutions (0.1 – 1.0 %) of Magnafloc 1687 are 2 – 4 days.
- Storage of solutions beyond the recommended periods may cause some decrease in product efficiency.
Shipping & Handling:
- Magnafloc 1607 is supplied in 227 kg plastic drums or 1100 kg intermediate bulk containers.
- Magnafloc 1607 is moderately corrosive towards mild steel, cast iron, aluminum and zinc surfaces and use of these should be avoided.
- Recommended materials of construction for storage tanks, dilution tanks etc, include stainless steel, fiber-glass, polyethylene and polypropylene.