MFE-7 EPOXY VINYL ESTER RESIN

• Excellent anticorrosion performance and mechanical properties.
• Good air drying.
• Pure resin casting’s oxygen index>= 32, when adds 3-5% Sb2O3 into MFE-7, the L.O.I. will up to 40.
• Both casting and laminate meet ASTM E-84 Flame Spread rating "Class 1" (FSI<25).

• MFE-7 resin provides resistance to a wide range of acids, alkalis, bleaches and organic compounds, etc.
• Used extensively in FRP ductwork stacks and stack-liner applications.
• Suitable for equipment handling mixtures of air and hot gasses, building panels, and flooring compounds where a degree of ignition-inhibiting properties is needed.
• The resin is designed for hand lay-up, spray-up, filament winding, compression molding, resin transfer molding techniques and pultrusion process.

• ¹ : Unopened drum with no additives, promoters, accelerators, etc. added. Shelf life specified from date of manufacture.Dark, at 25°C
• ² : Typical property values only, not to be construed as specifications. SI values reported to two significant figures; US standard values based on conversion.
• ³ : Cure schedule: 24 hours at room temperature; 2 hours at 120°C
• ⁴ : Maximum stress: 1.8 MPa (264 psi)

Standard package is 200kg per steel drum or 1000kg per IBC.

• Drums - Store at temperatures below 25°C.
• Storage life decreases with increasing storage temperature.
• Avoid exposure to heat sources such as direct sunlight or steam pipes.
• To avoid contamination of product with water, do not store outdoors.
• Keep sealed to prevent moisture pick-up and monomer loss. Rotate stock.