Enhanced TDS
Identification & Functionality
- Chemical Name
- Supplied By
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- Industrial Additives Features
Applications & Uses
- Markets
- Applications
- Segments
- Applications
- Applicable Processes
- Recommended Applications
"
Superfloc A-1800 series flocculants are recommended for the following liquid-solid separation processes:
- Mechanical dewatering.
- Dissolved air flotation – result in clear underflows and greater throughput.
- Gravity settling – improved floc formation for faster settling rates, increased sludge compaction and improved water quality.
- Coagulant aid – settling aid with inorganic and organic coagulants.
- Water clarification – improved influent, process and effluent water quality by reducing suspended solids and turbidity.
- Phosphorus control.
- Filtration.
- Viscosity Modification.
"
- Application Information
- Prior to initial use, the A-1800 series emulsion flocculants should be agitated thoroughly via a low speed (<475 rpm) drum/IBC mixer or a recirculation pump to ensure uniformity.
- Recommended working solutions are 0.5% concentration; however, stock solutions can be prepared up to 2% via an automated make-up unit or on a batch basis.
- Solutions should be aged 30 - 60 minutes for maximum effectiveness. High quality make up water should be used.
- Secondary dilution water can be added to the stock solution prior to the addition point to improve mixing with the substrate at a ratio up to 10:1.
- A distributing header or distribution ring is recommended in the treatment stream. Avoid centrifugal pumps for polymer transfer.
Properties
Packaging & Availability
Storage & Handling
- Handling and Storage Information
- Rubber gloves, goggles and protective clothing are recommended for use while handling these products.
- Recommended materials of construction include fiberglass reinforced plastic (FRP), high-density and/or cross-linked polyethylene, glass or epoxy-lined vessels.
- Stainless steels, Teflon, various plastics and rubbers are acceptable for pumps, seals and feed lines for both neat products and product solutions.
- Avoid natural rubber and Buna-N gaskets as these tend to swell when placed in contact with neat polymer.
- Do not use iron, copper or aluminum.
- The shelf life of these products is 9 months when stored at temperatures between 5-30°C.
- For best results avoid freezing. If the product freezes, thaw completely and mix prior to use.
- It is recommended that bulk tanks are mixed by periodically recirculating the contents of the tank.
- If possible drums and totes should be mixed well before first use and periodically thereafter.
- Spilled polymer is very slippery and should be absorbed onto an inert material and collected prior to thoroughly flushing with water.