Enhanced TDS
Identification & Functionality
- Product Type
- Supplied By
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Suitable for application temperatures down to 40°F
- Bleed through resistance to 160°F
- Excellent specific adhesion to low energy surfaces.
- Very high tack and peel with good shear.
- Good heat resistance.
- General purpose adhesion to a wide variety of substrates (including recycled corrugated board, LDPE and HDPE).
Applications & Uses
- Markets
- Applications
- Segments
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Recommended Applications
- Laser-printable labels
- Paper labels
- Recommended Applications
Testing conducted with 1 mil transfer coating on 20 lb copy paper; corrugated test panel.
- Minimum application temperature: 40°F
- Service range: 0 to 160°F
These values represent the service and application temperatures under ideal conditions. Performance should be tested at the actual conditions as a number of factors can cause application failure including construction, application surface, environmental conditions, and coatweight.
- Application Information
- Apply by any conventional method for high viscosity hot melts, including slot (die) or roll.
- It is strongly advised that evaluations of the adhesive be carried out to determine whether the product is suitable for use under individual coater operating conditions.
- Typical adhesive deposition is 0.8 to 1.2 mils for most applications. Coat at the lowest practical temperature, above 275°F, to avoid thermal degradation.
- Typical coating temperature range is 275° to 350°F.
- Excessive or prolonged heating should be avoided.
- Enclosure and blanketing of the molten adhesive with nitrogen is suggested to prevent oxidation.
Properties
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Precautionary Statement
- Use product with adequate ventilation and avoid breathing of vapor.
- Take precautions against skin contact with the molten adhesive to prevent serious burns.
Packaging & Availability
- Packaging Type
- Regional Availability
- Packaging Information
IDH # Package Description 1217568 Fiber drum: 58-gal 1217569 Chub
Storage & Handling
- Storage and Handling Conditions
- Under normal conditions, product is stable for a minimum of 24 months in unopened containers.
- Store drums in dry areas and keep them tightly covered to prevent contamination.
- Rotate stock using the oldest material first.
- Do not mix with any other products.
- Migratory materials in some face stocks and end-use substrates, e.g., vinyl films and foams, may affect performance.
- It is recommended that product be thoroughly tested for the particular application before large-scale use is attempted.