TECHNOMELT® PS 9129A

• Excellent adhesion to a wide variety of substrates.
• Tailored for use in high speed die cutting applications.
• Sea water resistance - meets BS5609.

• General purpose paper labels

Testing conducted with 1 mil transfer coating on 20 lb copy paper; corrugated test panel.

• Minimum application temperature: 10°F
• Service range: -20 to 120°F

These values represent the service and application temperatures under ideal conditions. Performance should be tested at the actual conditions as a number of factors can cause application failure including construction, application surface, environmental conditions, and coatweight.

• Apply by any conventional method for high viscosity hot melts, including slot (die) or roll.
• It is strongly advised that evaluations of the adhesive be carried out to determine whether the product is suitable for use under individual coater operating conditions.
• Typical adhesive deposition is 0.8 to 1.2 mils for most applications.
• Coat at the lowest practical temperature, above 275°F, to avoid thermal degradation.
• Typical coating temperature range is 300° to 350°F.
• Excessive or prolonged heating should be avoided.
• Enclosure and blanketing of the molten adhesive with nitrogen is suggested to prevent oxidation.