Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Supplied By
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Benefits
- No Surface Preparation Required
- Excellent Adhesion Properties
- Excellent Strength to Metals, E-Coat, Thermoplastics, Thermosets, and Engineering Plastics
- High Impact Resistance
- Suitable for Easy Manual and Pneumatic Dispensing
- Excellent Thermal Performance
- 100% Reactive
- Room Temperature Cure
- 1:1 meter-mix product for ease of application
- Use on as received metal surfaces including aluminum, stainless and plated steels and forms tough, high strength bonds without surface preparation
- Product Highlights
- No Surface Preparation Required
- Excellent Adhesion Properties
- Excellent Strength to Metals, E-Coat, Thermoplastics, Thermosets, and Engineering Plastics
- High Impact Resistance
- Suitable for Easy Manual and Pneumatic Dispensing
- Excellent Thermal Performance
- 100% Reactive
- Room Temperature Cure
- 1:1 meter-mix product for ease of application
- Use on as received metal surfaces including aluminum, stainless and plated steels and forms tough, high strength bonds without surface preparation
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Product Application
The product is best used at temperatures between 65°F and 80°F. Temperatures below 65°F will slow the cure speed of the material and viscosities will be higher. Temperatures above 80°F will cause the material to cure faster and viscosities will be lower. For consistent dispensing maintain temperature in the above mentioned range.For optimum bond strength and to insure maximum performance in the finished assembly mate parts together within the specified work time of the adhesive. Make sure the bond joint has uniform coverage and that a sufficient amount of adhesive is in the bond area. It is important to have the adhesive applied, parts aligned and positioned, within the established work times for the product. To ensure maximum performance in the finished assembly parts should remain undisturbed until the fixture time is reached.
- General Instructions
The product is best used at temperatures between 65°F and 80°F. Temperatures below 65°F will slow the cure speed of the material and viscosities will be higher. Temperatures above 80°F will cause the material to cure faster and viscosities will be lower. For consistent dispensing maintain temperature in the above mentioned range.
For optimum bond strength and to insure maximum performance in the finished assembly mate parts together within the specified work time of the adhesive. Make sure the bond joint has uniform coverage and that a sufficient amount of adhesive is in the bond area. It is important to have the adhesive applied, parts aligned and positioned, within the established work times for the product. To ensure maximum performance in the finished assembly parts should remain undisturbed until the fixture time is reached.
Properties
- Physical Form
- Appearance
- Off White or Amber
Packaging & Availability
- Packaging Type
- Regional Availability
- Packaging Information
MP55350 is conveniently packaged in 50 ml, 400 ml, pail, and drum kits. Special packaging is available upon request.
- Packaging Information
- MP55350 is conveniently packaged in 50 ml, 400 ml, pail, and drum kits.
- Special packaging is available upon request.
Storage & Handling
- Handling and Clean-Up
Clean up is best before the adhesive has cured. Cleaners containing NMP (N-methyl pyrolidone) or Citrus terpene provide the best results. On cured adhesive repeat use may be required.
- Storage and Shelf Life Conditions
Product should be stored in a cool dry place out of direct sunlight. The shelf life of MP55350 is one year from date of manufacture. Shelf life is based on the products being stored properly at temperatures between 55°F and 75°F. Exposure to temperatures above 75°F will reduce the shelf life. This product should NEVER BE FROZEN.
- Storage and Handling Information
Handling and Clean-Up: Product should be stored in a cool dry place out of direct sunlight. The shelf life of MP55350 is one year from date of manufacture. Shelf life is based on the products being stored properly at temperatures between 55°F and 75°F. Exposure to temperatures above 75°F will reduce the shelf life. This product should NEVER BE FROZEN.
Storage and Shelf Life: Clean up is best before the adhesive has cured. Cleaners containing NMP (N-methyl pyrolidone) or Citrus terpene provide the best results. On cured adhesive repeat use may be required.