Products

This product is intended for bonding applications. It is specifically designed for assembling challenging-to-bond materials that necessitate uniform stress distribution and possess high tension and/or shear strength requirements. This adhesive facilitates rapid bonding of a broad spectrum of materials, including metals, plastics, and elastomers. Notably, This product features a gel consistency that prevents adhesive flow, even on vertical surfaces. Additionally, it is suitable for bonding porous materials such as wood, paper, leather, and fabric.

It is a water-soluble rust conversion primer with excellent metal adhesion and anti-corrosion properties designed for the protection of steel.

This product is a ready-to-use adhesive product designed for industrial applications. It is compatible with various substrates and surfaces, including elastomers, rubbers, neoprene, polycarbonate (PC), acrylonitrile butadiene styrene (ABS), plastics, polyvinyl chloride (PVC), steel, metal, and aluminum. It cures through moisture and features low viscosity.

This versatile compound is a ready-to-use product known for its corrosion resistance, durability, and good adhesion. It is typically applied using a spray method and is compatible with various substrates, including aluminum, galvanized steel, metal, and steel. This product is in the form of a red liquid.

This product is a high-performance two-part methacrylate adhesive designed for bonding various materials, including plastics, metals, and composite assemblies. This adhesive is known for its exceptional bond strength, durability, impact resistance, and weathering properties. This versatile compound significantly enhances the reliability of finished assemblies due to its outstanding flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, as well as resistance to a wide range of chemicals and environmental conditions.

This product is a one-part adhesive designed for bonding applications. It is a rubber-toughened adhesive with improved flexibility, peel strength, and shock resistance. This adhesive offers rapid bonding on a diverse range of materials, including metals, plastics, elastomers, and porous or absorbent materials like wood, paper, leather, and fabric.

This product is a condensed aluminum polyphosphate, presented in a white powder form. It acts as a ceramifying agent at temperatures above 300 °C and is used in combination with ammonium polyphosphate. Its use in intumescent coatings improves char performance by increasing insulation and enhancing cell structure homogeneity.

This is a versatile two-component, 1:1 ratio, 100% solids, fast-setting liquid-applied polyurea liner system designed for use on metal, concrete, fiberglass, and wood surfaces. Its key physical properties include being seamless, high-build, tough, and elastomeric. It is available in clear, neutral, or black color options to suit various applications.

This product is compatible with fragrance. The use of 100% fragrance oil is recommended to minimize streaking that can be caused by pre-dispersed fragrance oils. Add the fragrance oil directly to This product before mixing with water. It has an inherent ability to disperse hard water ions and will perform exceptionally well in varying water hardness. However, if poor performance is observed, the use of a small amount of chelating agent may be required for optimal performance.

This is a versatile adhesive designed for a wide range of applications, offering excellent multi-substrate adhesion to various materials including acrylic, ABS, aluminum, composites, epoxies, fiberglass, metal, nylon, phenolics, plastics, PPO, polyamide, PBT, PC, PEEK, PET, polyurethane, PVC, RIM urethane, stainless steel, steel, and vinyl. This ready-to-use product features chemical resistance, durability, excellent performance, thermal cycling performance, toughness, good adhesion, bonding strength, weather stability, impact resistance, high temperature performance, improved flexibility, and room temperature curing.

This product is a lint-free wipe that comes pre-saturated with a solvent blend. It is free from chlorinated or aromatic solvents, ethylene glycols, and fluorinated compounds. This wipe is intended for degreasing mixed-material surfaces, including metal, plastic, and painted surfaces. It quickly dissolves carbonaceous soils such as greases, cutting oils, oily and wax-like temporary protective coatings, and paraffin.

It is a long chain ammonium polyphosphate phase II catalyst for solvent- and water-based intumescent coatings, with low solubility in water and organic solvents, providing heat protective barrier foaming up.

This product is a high-performance two-part methacrylate adhesive specifically designed for bonding a diverse range of materials, including plastics, metals, and composite assemblies. This adhesive stands out for its exceptional bond strength, durability, and impressive impact and weathering properties.

It is a long chain ammonium polyphosphate phase II used in solvent- and water-based intumescent coatings, offering high quality and long term shelf life in waterborne paints.

This product is a ready-to-use adhesive product classified as a 1K (1 component) adhesive. It is compatible with various substrates and surfaces, including elastomers, rubbers, neoprene, polycarbonate (PC), acrylonitrile butadiene styrene (ABS), metal, plastics, polyvinyl chloride (PVC), steel, and aluminum. It cures through moisture and appears as a clear liquid when uncured.