Products

TECHNOMELT® GA 8338 is a light yellow-colored, low-viscosity, pressure-sensitive hot melt adhesive. It is designed for bonding foam to metal and has excellent low- and high-temperature adhesion. It also has good adhesion to spun-bond polyolefins and typical paper stocks. It has aggressive tack and low quick stick values. It can be extruded or sprayed by all standard hot melt equipment.

PAN KEY G1304 is offered in powder form, It is recommended for general cement-based tile adhesives and cement-based applications. It targets markets in adhesives and sealants, building and construction, and paints and coatings.

AQUENCE® BG 31753 is a ready-to-use contact adhesive, primarily designed for the bags and sacks market. It offers good adhesion. This product is specifically developed for use as bag bottom paste, with a focus on providing excellent adhesion within the targeted viscosity range. It is intended for bonding films to paper SBS and other porous substrates, including treated P.P, O.P.P, P.E, and various challenging surfaces that are typically difficult to adhere to.

LOCTITE® 454™ 30 GM SYRINGE is intended for bonding applications. It is specifically designed for assembling challenging-to-bond materials that necessitate uniform stress distribution and possess high tension and/or shear strength requirements. This adhesive facilitates rapid bonding of a broad spectrum of materials, including metals, plastics, and elastomers. Notably, This product features a gel consistency that prevents adhesive flow, even on vertical surfaces. Additionally, it is suitable for bonding porous materials such as wood, paper, leather, and fabric.

TECHNOMELT® 246A is a ready-to-use product, with a solid yellow color, is based on the chemical family of paraffin waxes and hydrocarbon waxes. It is designed for various applications in the adhesives and sealants markets, including other adhesive and sealant applications.

HARCROS ANTIFOAM 100 IND is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in both aqueous and non-aqueous systems. It is primarily used in non-aqueous industrial applications where silica fillers can be tolerated.

THETAGUARD™ HS-3020, classified under Mortar and Gypsum Additives in Construction Chemicals, is utilized in the leather manufacturing process. It serves segments within chemical manufacturing.

POLYFILL 203 is a solid powder known for its high loading capacity and low surface area. It acts as both a smoke suppressant and a flame retardant in plastics, elastomers, and composite material applications.

ISOLENE® 40-S is a low-molecular-weight liquid polymer derived from synthetic polyisoprene rubber. It offers the performance of natural rubber, with the added benefit of a lighter color and none of the natural impurities inherent in natural rubber products. It is a lower-viscosity liquid than the other ISOLENE® liquid rubber products. It is a translucent, honey-colored liquid in bulk form and virtually clear in a thin film.

LOCTITE® LIOFOL® LA 7910 is a ready-to-use adhesive product with laminating capabilities. It is a 1K (1 component) adhesive suitable for use with paper and foils. It cures through moisture and is applied using a roller. This product offers good bonding strength, heat resistance, heat sealability, and high viscosity. It is typically used in the printing and packaging industry.

LOCTITE® LIOFOL® CS 7416 is a water-based, natural rubber latex cold seal adhesive known for its exceptional adhesion to substrates such as paper, glassine, cellophane, and treated and untreated coextruded polypropylene films. It offers high mechanical stability, good compatibility with release lacquers, and low foaming even at high press speeds, making it a reliable choice for various applications.

FUMED SILICA HB-151 is hydrophobic fumed silica after being treated with DDS (dimethyldichlorosilane) based on hydrophilic fumed silica with a specific surface area of 150 m²/g. It's a kind of high-purity white colloidal powder.

SIS 1120 is a styrene-isoprene-styrene triblock copolymer produced via proprietary sequential anionic polymerization with a linear structure and a diblock ratio of <1%. It is in the form of a porous particle with outstanding thermal stability and melt process ability, is easier to process and mix than SBS, and has a small solution viscosity. It is mainly used in hot-melt pressure-sensitive adhesives for labels and tape.

TAMANOL E-102A is a terpene phenolic resin emulsion. This product is formulated with microscopic particles. This product is specifically designed for water-based adhesives, including acrylic emulsions, natural rubber, and synthetic rubber latex-based adhesives. The product has a white emulsion appearance.

ETHYLENE GLYCOL is a clear, moderately viscous, and hygroscopic liquid at room temperature. It is a straight-chain aliphatic compound terminated on both ends by a hydroxyl group. This versatile chemical compound finds utility in various applications, including heat transfer agents, unsaturated polyester resins, chemical intermediates, plasticizers, humectants, and solvents.