Products

It is a gel-method silica matting powder with large and equal particle sizes, featuring a special surface treatment. Specifically designed for thick coating-type pre-coated coil coatings, it offers excellent abrasion and scratch resistance while providing a matte finish. This matting agent is dispersible, easy to handle, and functions effectively as a flattener. 

This product is a light yellow-colored, low-viscosity, pressure-sensitive hot melt adhesive. It is designed for bonding foam to metal and has excellent low- and high-temperature adhesion. It also has good adhesion to spun-bond polyolefins and typical paper stocks. It has aggressive tack and low quick stick values. It can be extruded or sprayed by all standard hot melt equipment.

This is an acrylic-based adhesive designed for laminating metalized films and foils. It comes ready for use and is typically run at a preferred temperature range of 70-85 °F. This adhesive can be cleaned up while it is still wet or dry, offering convenience in various applications.

This product is an elastomeric-based, cold-applied, pumpable rubber-based mastic and spot weld sealer. It is applied between inner and outer panels to prevent metal-to-metal contact and reduce vibration. It exhibits good adhesion to oily metal and aluminum surfaces and excellent wash-off resistance.

It is a surfactant-free, multiphase, self-crosslinking acrylic polymer with a very fine particle size, providing excellent pigment wetting in coatings and excellent adhesion to metal.

It is a free acid phosphate ester derived from 2-HEMA (hydroxyethylmethacrylate). Predominantly composed of the monoalkyl phosphate ester, this compound can be easily incorporated into a variety of polymer systems.

This product is a high-performance two-part methacrylate adhesive specifically designed for bonding a diverse range of materials, including plastics, metals, and composite assemblies. This adhesive stands out for its exceptional bond strength, durability, and impressive impact and weathering properties.

This product is a ready-to-use hot-melt adhesive. It is designed for various applications within the adhesives and sealants market, including other adhesive and sealant applications.

This product is a hot-melt adhesive with a translucent, very pale yellow appearance. It is designed for peel-able attachment to plastic, paper, glass, and metal surfaces. It's also well-suited for pallet stabilization and various packaging applications that require a peel-able bond, making it an excellent choice for temporary paper-to-book cover tipping.

This product is a high-performance, one-component solvent-based bonding agent crafted for use with NR (natural rubber), SBR (styrene butadiene rubber), CR (polychloroprene rubber), BR (butadiene rubber), and Vamac® compounds, enabling strong adhesion to both metal and plastic substrates. This versatile product is also designed as an effective post-vulcanizing (PV) bonding system. It offers the added advantage of being suitable for bonding rubber materials to specific fibers, cords, and fabrics, including cellulose, polyamides, polyester, and glass, making it a valuable solution for various applications.

This product is compatible with fragrance. The use of 100% fragrance oil is recommended to minimize streaking that can be caused by pre-dispersed fragrance oils. Add the fragrance oil directly to This product before mixing with water. It has an inherent ability to disperse hard water ions and will perform exceptionally well in varying water hardness. However, if poor performance is observed, the use of a small amount of chelating agent may be required for optimal performance.

This product is a coagulant characterized by its highly cationic nature, and it is available in liquid form with low viscosity. Its primary application is to enhance the efficiency of solid-liquid separation processes. This coagulant is typically used either independently or in combination with an anionic flocculant to facilitate the separation of solids from liquids.

This product is a multi-purpose silicone fluid in an aerosol spray can for use on food and beverage processing equipment. It is a fully synthetic, high-performance multi-purpose fluid that has been specially formulated to lubricate conveyors, slow-rotating machinery, small slow-speed bearings, and pivot points in the food and beverage processing and packaging industry. It is based on a synthetic fluid carefully chosen for its ability to meet the stringent requirements of the food industry.

This product is a high-performance solvent-based primer specifically designed for use in conjunction with Cilbond Cover-Coat systems. It serves as an effective bonding agent for NR (Natural Rubber), SBR (Styrene Butadiene Rubber), CR (Polychloroprene Rubber) and CSM (Chlorosulfonated Polyethylene Rubber). Additionally, It can be used as a one-component vulcanizing and post-vulcanizing bonding agent for these rubber compounds, making it a versatile choice for various applications.

This is a ready-to-use product, with a solid yellow color, is based on the chemical family of paraffin waxes and hydrocarbon waxes. It is designed for various applications in the adhesives and sealants markets, including other adhesive and sealant applications.