Adhesives & Sealants

TECHNOMELT® PUR 3365 offers flexibility at both high and low temperatures. It cures to its final bond strength in approximately 7 days, with about 80% cure achieved in 1-2 days, depending on environmental factors. This adhesive exhibits good adhesion to PVC and acetate films. For bonding PP and PE films, a recent Corona pretreatment is required to achieve a surface energy of 40 dyne/cm.

H5-1000 RESIN It is available in granule form and is compatible with various polymers and resins, including ethylene vinyl acetate (EVA), styrene isoprene styrene (SIS), styrene ethylene butylene styrene (SEBS), and amorphous polyalphaolefin (APAO).

HEADCEL® HPK60MS is a surface-treated hydroxypropyl methyl cellulose (HPMC) widely used in building materials. Could be soluble in water to form a transparent solution. It can be widely used in tile adhesive, gypsum plaster, and waterproof mortar.

Hubercarb® Q4 is a fine-ground calcium carbonate produced at Huber's Quincy, Illinois, known for its natural uniformity, consistent purity, and brightness. This material also has a carefully controlled particle distribution, allowing it to be used in a wide range of applications, including paints, coatings, adhesives, caulks, plastics, and construction building products.

AQUENCE® GA 6079 is a formulated emulsion adhesive with a fluid, pink appearance. It is specifically designed for business form collating applications, particularly when using extrusion systems. This adhesive offers excellent setting speed, clean machining, and strong adhesion, especially to NCR paper.

PAN KEY G1304 is offered in powder form, It is recommended for general cement-based tile adhesives and cement-based applications. It targets markets in adhesives and sealants, building and construction, and paints and coatings.

LOCTITE® LIOFOL® CS 7416 is a water-based, natural rubber latex cold seal adhesive known for its exceptional adhesion to substrates such as paper, glassine, cellophane, and treated and untreated coextruded polypropylene films. It offers high mechanical stability, good compatibility with release lacquers, and low foaming even at high press speeds, making it a reliable choice for various applications.

TECHNOMELT® GA 7613 is a solid hot-melt adhesive product with a yellow color. This product is designed for various applications within the adhesives and sealants market, including other adhesive and sealant applications.

HARCROS ANTIFOAM 100 IND is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in both aqueous and non-aqueous systems. It is primarily used in non-aqueous industrial applications where silica fillers can be tolerated.

HEADCEL® ME60MS is widely used in building materials. It could be soluble in water to form a transparent solution. It can be widely used in tile adhesive, gypsum plaster, and waterproof mortar.

HEADCEL® HE-100000S is used as a rheology modifier and thickener, mainly in applications related to paints and coatings. This product is in the form of a powder and appears as a white to slightly off-white powder.

Hubercarb® Q325 is a medium-fine ground calcium carbonate produced at Huber's Quincy, Illinois plant, known for its natural uniformity, consistent purity, and brightness. It has a carefully controlled particle distribution, allowing it to be used in a wide range of applications, including paints, coatings, adhesives, caulks, and concrete building products. Its acid solubility above 95% makes it ideal for use in oilfield drilling fluids.

BINDER® O-1310 is a 100% C5 aliphatic hydrocarbon resin known for its slightly higher softening point and narrow molecular weight distribution. It is primarily used as a tackifier in various adhesive polymers, including SIS, EVA, natural rubber, synthetic polyisoprene, polyisobutylene, butyl rubber, AO, and APAO.

HEADCEL® HPK75MS is surface-treated with hydroxypropyl methyl cellulose (HPMC), widely used in building materials. Could be soluble in water to form a transparent solution. This product can be widely used in tile adhesive, skim coat, and ETICS.

TECHNOMELT® GA 003A is a hot-melt adhesive with a translucent, very pale yellow appearance. It is designed for peel-able attachment to plastic, paper, glass, and metal surfaces. It's also well-suited for pallet stabilization and various packaging applications that require a peel-able bond, making it an excellent choice for temporary paper-to-book cover tipping.